Convertible Proportional Valve Drivers
The result of 20 years of experience, our drivers satisfy the demands of industry leaders for smooth and precise control of hydraulic valves.
Advantages of our Convertible Drivers:
- Digital display confirms proper operation at a glance: it shows the input signal directly in Volts or mA, the output current directly in Amps or the driver settings names and values
- Only need one part number for input signals 0-5V, 0-10V, 0-20mA or 4-20mA, for coils rated 1A, 2A or 3A and power supply 12V or 24V
- The only tool you need to install and tune up is a standard screwdriver
- Better linearity and control
- More effective dither
- Easy to read and duplicate settings
- Diagnosis possible even over the phone
- Insensitive to vibrations
- Wider operating voltage and temperature, output current, dither frequency range, independent up and down ramps
- Technical support by the designer, available 24/7 on request

Specifications:
- Operating Voltage: 9 - 35VDC
- Operating Temperature: -40° to +75° Celsius
- Maximum Output Current: 3A
- Excellent Linearity: 0.5%
- Input Signals: 0-5V, 0-10V, 0-20mA, 4-20mA, +/-10V
- PWM/Dither Frequency: 50-500Hz
- Ramps Adjustable: 0 to 99.5 Seconds
For data sheet, please click part number in the table below:
![]() |
![]() |
![]() |
![]() |
![]() |
||||||
direct mount on DIN43650/A solenoid, DIN43650/A cable connector |
direct mount on DIN43650/A solenoid, 3m long 4 x 18AWG cable |
open board in DIN rail cardholder |
epoxy potted, spade connectors |
sealed in NEMA 4X plastic box |
||||||
one solenoid |
two solenoids |
one solenoid |
two solenoids |
one solenoid |
two solenoids |
|||||
convertible: 0-5V, 0-10V, 0-20mA or 4-20mA |
PVD3DIN | PVD3D3M | PVD3D1R | PVD3D2R | PVD3D1E | PVD3D2E | PVD3D1N | PVD3D2N | ||
bipolar +/-10V differential |
PVD3XDN | PVD3X3M | N/A | PVD3X2R | N/A | PVD3X2E | N/A | PVD3X2N | ||
two ON/OFF to select one of four pre-sets per channel |
PVD3SDN | PVD3S3M | PVD3S1R | PVD3S2R | PVD3S1E | PVD3S2E | PVD3S1N | PVD3S2N |